We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
One of our customers, a manufacturer of food packaging equipment, was looking for a solution to supply hydrogen peroxide in into their aseptic sterilisation process of food packaging. As a solution, Bronkhorst supplied multiple vapour-generating systems consisting of liquid flow controllers, gas flow controllers and a temperature-controlled mixing and evaporation device.
Food products are often sterilised as a final step in the process. In aseptic sterilisation the foods have been sterilised outside the packaging. This can be done by steam sterilisation. After that, the foods are placed in the aseptic packages that have been sterilised previously in a separate way. The last step is sealing the packages under sterile conditions.
For this application a compact liquid flow controller is needed to control a low flow of hydrogen peroxide solution (flows of ca. 1 kg/h), to inject into a formed packaging. PET bottles, cartons or pouches, and caps need to be sterilised separately. After the sterilisation step, the remaining hydrogen peroxide will be removed by using air drying.
The solution consists of two Bronkhorst vapour-generating systems (CEM - Controlled Evaporation and Mixing systems) - one side for PET bottles, cartons or pouches and another side for caps. The hydrogen peroxide (35% H2O2 in water) is injected as a vapour for better concentration control. The vapour condenses at the inside surfaces of the packaging, where the H2O2 in the liquid phase performs its sterilising action. In a subsequent drying step, the condensate is removed using hot air supplied by a gas mass flow controller, after which the dry and aseptically sterilised packaging is ready to be filled with liquid or cream.
The vapour-generating CEM systems each consist of a liquid mass flow controller (thermal LIQUI-FLOW or Coriolis-based mini CORI-FLOW), a EL-FLOW Select mass flow controller for air as a carrier gas (and for drying afterwards), and a temperature-controlled mixing and evaporation device.
The hydrogen peroxide is dosed accurately in the range of 200 (for caps) to 2000 (for cartons and pouches) g/h of H2O2 solution, and the flow of drying air is typically around 100 l/min. The liquid, gas and temperature controllers communicate easily with PLC’s for an optimum integration in the customer’s systems.
Due to its robust configuration with direct through-flow measurement, the thermal LIQUI-FLOW requires minor mounting precautions to be able to operate inside the customer’s systems. At this time, more than 100 vapour-generating solutions (CEM) have been installed worldwide on aseptic sterilisation systems.
As an alternative, use of the mini CORI-FLOW flow controller has the advantage that - in addition to its medium-independent mass flow - the density of the dosed medium is measured. As hydrogen peroxide will eventually decompose into water and oxygen, the physical properties of the dosed H2O2 solution are not constant over time. Therefore, this device is able to monitor the concentration and, hence, the quality of the hydrogen peroxide dosing.
Due to the fact that hydrogen peroxide is injected in a controlled way so that not too much will be supplied, the costs of this sterilising agent are reduced. Using this solution, the aseptic sterilisation process is well-monitored and traceable, contributing to the extension of the shelf-life of food products.
Contact us if you have any questions & stay up to date with the latest developments in flow control by subscribing to our blog mailing list. You'll receive a blog every 2 weeks.