Waar ben je naar op zoek?
Bronkhorst
Datasheet FF-C1xS

FLEXI-FLOW Compact FF-C1xS

Massa Flow en Druk Regelaar met Shut-Off Klep

  • Snelle en stabiele regeling
  • Compacte, geïntegreerde shut-off klep
  • On-board gas conversie model
  • 22 unieke gassen
  • Multi-parameter output: mass flow, temperatuur en druk
  • USB-C en Bluetooth communicatie
  • Namur NE107 status indicatie
Vraag offerte aan Downloads Datasheet
FLEXI-FLOW CompactFF-C1xS

Mass Flow / Pressure Controllers with shut-off valves

FLEXI-FLOW Compact models FF-C10S and FF-C11S Mass Flow / Pressure Controllers with integrated shut-off valves. They are suited for accurate measurement and control of flow ranges between 0…500 mln/min and 0…20 ln/min at operating pressures between 0,8 and 17 bar(a). The instrument combines a swift and stable thermal mass flow sensor based on capillary MEMS technology with a precise and proven by-pass construction. Due to the unique, internationally patented TCS Technology (Through Chip Sensor), accurate mass flow measurement, virtual independent of variations in temperature and line pressure is established. In combination with integrated temperature and up- and downstream pressure sensors, the embedded database for 22 gases allows accurate, on-board conversion. The multi-parameter instruments provide the user with useful process information. 

FF-C1x Mass Flow / Pressure Controllers with shut-off valve are Built-to-Order (BtO) and currently available in 2 variants:

  • Type FF-C10S: flow + temperature
  • Type FF-C11S: flow + temperature + up- and downstream pressure

Technische specificaties

Meet- / regelsysteem
Flowbereik (tussenliggende bereiken beschikbaar)min. 0…500 mln/min
max. 0…20 ln/min
(gebaseerd op N2)
DrukbereikenFF-C10S: niet beschikbaar / FF-C11S: 0...17 bar(a)
Nauwkeurigheid (incl. lineariteit) (gebaseerd op actuele kalibratie)Up to ±0,5% Rd plus ±0,1% FS (N2/Air/O2)
voor andere gassen conversieonzekerheid toevoegen; zie multi gas tabel;
HerhaalbaarheidFlow sensor: < ±0,2% Rd;
Pressure sensors: < ±0,2% FS
Turndown ratioup to 1:1000
Max. bedrijfsdruk16 bar(g)
Multi Gas / Multi Rangeembedded gas data for 22 unique gases plus any mixture of these gases
Settling time (in regeling, typisch)< 150 ms
Langetermijnstabiliteit< 0,5% FS over period of 3 years; then < 0,2% FS per year
Stabiliteit van de regeling< ± 0,1% FS (typical for 1 ln/min N2)
Bedrijfstemperatuur0 … 50 °C
Opslag / Transport condities-20 … +80 °C, max. 95% RH (non-condensing)
Montageany position, attitude sensitivity negligible
TemperatuurgevoeligheidFlow sensor: zero 0,015% FS/ºC; span 0,05% Rd/ºC;
Pressure sensors: zero 0,16 mbar/ºC; span 0,05% Rd/ºC
Nauwkeurigheid temperatuurmeting± 0,2 ºC (instrument body temperature)
Nauwkeurigheid druksensoren±0,5% FS
Drukgevoeligheidstandard: < 0,15% Rd/bar typical N2;
with pressure correction: typical factor 5 improved
Lekdichtheid, naar buitentested < 2 x 10-9 mbar l/s He
Lek door gesloten kleptypical < 1 x 10-4 mbar·l/s He;
< 2 x 10-8 mbar·l/s He for shut-off valve
Mechanische delen
Instrument bodyAluminium or Stainless steel (selectable)
Materiaal (onderdelen die in contact komen met het medium)aluminium, stainless steel, silicon nitride, epoxy, aluminium oxide, glass
Oppervlaktekwaliteit< 1,6 mu Ra
Drukclassificatie16 bar(g) / 250 psig
Max. ΔP16 bar(d);
20 ln/min models: 5 bar (d)
ProcesaansluitingenBSPP female thread (ISO1179-1); couplings to be ordered separately
AfdichtingenFKM 51415; valve seat: FFKM with PI film
Gewicht350 g with Aluminium body, 450 g with SS 316 body;
add 50 g for Ethernet interface
Beschermingsgraad (behuizing)IP40
Elektrische eigenschappen
Stroomvoorziening24 Vdc ± 10%
Max. stroomverbruik2,5 Watt (typical, in control);
add 0,9 Watt for EtherNet communication;
add 2,4 Watt for integrated shut-off (N/C)
Digitale communicatieModbus RTU or FLOW-BUS (selectable)
Optional: PROFINET, EtherCAT, Modbus-TCP, Ethernet/IP or POWERLINK
Support interfaceUSB-C port for easy setup;
Optional Bluetooth connection for monitoring
Elektrische aansluiting9-pin D-sub (male)
CertificatieCE / UKCA / KC
Elektrische aansluiting
Control valve options
Externe actuatoropties die op de controller moeten worden aangesloten
Certificering voor explosiegevaarlijke zones
Goedkeuringen / certificaten

Technische specificaties kunnen zonder kennisgeving worden gewijzigd.

Voor technische maattekeningen en aansluitschema's bezoekt u de productpagina op onze website

Downloads

Brochures
FLEXI-FLOW Compact brochure
Manuals
Manual FLEXI-FLOW Compact
Quick Start Guide FLEXI-FLOW Compact with shut-off
Mounting Instruction Compression Fittings RS
Mounting Instruction Compression Fittings ISO
Mounting Instruction Push-in Fittings
Hook-up diagrams
FLEXI-FLOW Compact with shut-off valve Modbus-RTU / FLOW-BUS
FLEXI-FLOW Compact with shut-off valve Ethernet
Dimensional drawings
Dimensional drawing FF-C1xS
Download als PDF

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!