Hydrogen storage in Liquid Organic Hydrogen Carriers (LOHC)

Bronkhorst’s distributor, Wagner Mess- und Regeltechnik, assisted German R&D companies in their research fo find a new way of storing hydrogen: in synthetic aromatic-based heat transfer oils that are normally used in bakery systems and other high temperature applications. Here the heat transfer oil acts as a liquid organic hydrogen carrier, LOHC. In this setup high temperature Coriolis flow meters combined with WADose HPLC pump play an important role.

Check out the Bronkhorst solution

Application requirements

The companies investigate at which pressure the reaction performs best for loading and unloading. To this end, accurate flows of LOHC and hydrogen must be supplied to the reactor. Tricky part here is the change of viscosity of the LOHC before and after the catalytic reaction. The mass flow meters need to be able to cope with these viscosity changes.

Important topics

Ability to dose and pump viscous liquids
Accuracy & high temperature
Flow meters need to be able to cope with viscosity changes

Process solution

In one setup, the LOHC is heated up to reach the right viscosity range and is brought to a higher-pressure level by a Wadose HPLC pump with heating element. A high temperature Coriolis flow meter with suitable electronics and a control valve is used here to dose the LOHC to the reactor vessel.

In a different setup, the dosing of the LOHC at higher viscosities also works very well with HNP pumps in combination with the Coriolis mass flow meters. Here the medium does not have to be heated up very much, because the pump copes very well with high viscosities.

Flow scheme: to store hydrogen in tank for transport (loading process)

Of the hydrogen that is fed to the LOHC process, the flow is only measured. This hydrogen (that leaves the electrolyser in a previous stage prior to entering the reactor vessel) is pressure-controlled.

For this application, several Bronkhorst instruments are being used for several aspects of the process:

to apply a pressure,
for pumping,
for measuring and controlling media
to reveal the media density
to measure relevant temperatures

The combination of these devices makes it a highly functional solution.

Flow scheme: LOHC after transport (unloading of hydrogen)

In-depth information about the Hydrogen storage research:

The hydrogen is stored inside the liquid hydrogen carriers via a catalytic reaction. The liquid now has a low viscosity and looks like water. After the hydrogenation the viscosity has increased, and the liquid looks like honey. When loaded with hydrogen, this LOHC is flame-retardant, which makes it a safe transport medium for hydrogen to the location of use where the hydrogen can be unloaded from this carrier liquid.

The loaded LOHC can be stored at ambient conditions, which is (another) advantage over gaseous hydrogen. This loading/unloading is a reversible process; hydrogenation (loading) requires higher pressures, is exothermal and therefore releases energy, whereas dehydrogenation (unloading) is an endothermal process which requires energy and therefore higher temperatures - both catalyst-driven.

More about our hydrogen solutions Download Hydrogen brochure

お問い合わせ内容 *:	当てはまるお問い合わせ内容を選択して下さい
ご質問 / コメント:
会社名 *:
氏名 *:
Email *:
国 *:
電話番号:
ファイルの添付:
はい、提供された情報は分析のために保存されることを理解し、プライバシーに関する声明を読みこれに同意致します。 *:

	このフォームの入力時に問題が発生した場合や自動返信のメッセージを受け取られなかった場合、電子メール(sales◎bronkhorst.jp宛、◎を@に置き換えて下さい)にてご連絡下さい。

Flow Meter dosing solution for Hydrogen storage

In Liquid Organic Hydrogen Carriers (LOHC)

Application requirements

Important topics

Process solution

In-depth information about the Hydrogen storage research:

Recommended Products

Do you need advice on flow meters for hydrogen transport? Contact us