What are you looking for?
Bronkhorst
Datasheet SW-200

VDM Evaporator SW-200

蒸氣輸送模塊

  • 精確控制的氣體/液體混合物
  • 預先測試、安全且隨時可用
  • 高再現性
  • 非常穩定的蒸汽流量
詢價 下載 數據表
VDM EvaporatorSW-200

All-In-One Vapour Delivery Module

Bronkhorst® model SW-200 VDM All-In-One Vapour Delivery Modules are suited for precise vapour flow delivery, composed by mixing up to 120 g/h H2O (320 g/h IPA) with max. 10 ln/min of carrier gas at operating pressures between vacuum and 10 bar. The VDM incorporates the components of a Bronkhorst® CEM-System and more! Besides gas and liquid flow controllers and the temperature controlled evaporator, the module features integrated power supply with display (1,8"TFT) and control functions. As an option, the unit offers local or remote trace heating temperature control.

Technical specifications

Measurement / control system
Ambient temperature5 … 40 °C
Max. heating temperature200 °C
Heater capacity100 W
Mechanical parts
Material (wetted parts)stainless steel 316L or comparable
Pressure rating (PN)10 bar g
Process connectionsGas and liquid inlet: compression type or face seal couplings;
Vapour outlet: 1/4" tube (other options on request)
SealsViton®/Kalrez®; other on request
Purge outlet1/8" OD compression type or 1/8" face seal male
PlungerKalrez®; other on request
Display1,8" (TFT technology)
Mains supply inletIEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz
Electrical properties
Max. power consumptionmax. 250 VA;
add 300 VA for optional tracing control
Electrical connectionFLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector);
Optional: Pt100-connection (1 x 4-pin M12 male, a-coded);
Optional: IEC 60320-2-2/C13 female tracing outlet
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

Note: For gas an liquid flow control, the VDM module is equipped with Bronkhorst Thermal or Coriolis Mass Flow Meters/Controllers.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
VDM brochure
Manuals
Manual Vapor Delivery Module
Dimensional drawing
Dimensional Drawing SW100-SW200
Download as PDF
台灣柏朗豪斯特股份有限公司

新竹縣竹北市台元街三十八號四樓之一、二
Rm. 1 & 2, 4F., No.38, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.)
電話 +886 3-5600-518
[email protected]

            Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!