magnetic flow meters for low flow rates - MAG-VIEW series

MAG-VIEW™ 低流量磁感應流量計

用於測量或計量導電液體的緊湊型流量計

MAG-VIEW™ 是一種緊湊、高質量且經濟的設備，用於在無法使用帶有活動部件的流量傳感器的應用中測量液體流量。 MAG-VIEW™ 的無干擾運行、長壽命週期和獨立於入口和出口管道，即使在緊湊型機器和安裝中也是完美的解決方案。流量計可用於連續測量或用於配料和定量給料應用。

最低範圍 0,0083 ... 1 l/min
最高範圍 5 … 250 l/min

聯絡我們 Go to webshop

E-book: How to handle low liquid flows

Focusing on low liquid flows < 100 g/h

Download the e-book 'How to handle low liquid flows' to find out more about 'low flows'. Including in-depth information, technical advice and insider tips from our experts.

Download e-book

The MAG-VIEW™ series operates on the magnetic inductive principle and is therefore suitable for electrically conductive liquids with a minimum conductivity of 20 or 50 μS/cm. The output signal (pulse frequency or 4-20 mA) is proportional to the flow. The flow meters feature fast response, low pressure drop and a weatherproof (IP65) enclosure.

Quick link to Magnetic Flow Meter model pages

Pulse/Analog output - PN 10 bar	Pulse output - PN 16 bar	Pulse/Analog output - PN 16 bar
	MVM-001-PN \| 0,0083 ... 1 l/min	MVM-001-PA \| 0,0083 ... 1 l/min
MVM-002-QA \| 0,1 ... 2 l/min	MVM-002-PN \| 0,05 ... 2 l/min	MVM-002-PA \| 0,05 ... 2 l/min
MVM-005-QA \| 0,25 ... 5 l/min
MVM-020-QA \| 1 ... 20 l/min
	MVM-030-PN \| 0,5 ... 30 l/min	MVM-030-PA \| 0,1 ... 30 l/min
MVM-050-QA \| 2,5 ... 50 l/min
	MVM-060-PN \| 1 ... 60 l/min	MVM-060-PA \| 0,2 ... 60 l/min
MVM-200-QA \| 10 ... 200 l/min
MVM-250-QA \| 12,5 ... 250 l/min	MVM-250-PN \| 5 ... 250 l/min	MVM-250-PA \| 5 ... 250 l/min

Features

Make liquid flows visible by pulse output, analog output (4 .. 20 mA) or blinking LED (red/green)
No moving parts (no mechanical wear)
Ease of mounting and operation
Free pipe cross section, no additional pressure drop
Fast response
Insensitive with contaminated liquids
Ideal solution for interference free operation combined with a long-life cycle
Wide independence to the inlet and outlet pipes create the advantage to be able to install in compact machines with cramped confines.
Lightweight and compact design
Suitable for mobile applications
Low power consumption

Downloads

Brochures
MAG-VIEW Brochure

Applications

The fields of application for this magnetic flow meter are diverse:
They can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media. The sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 50 µS/cm.

Markets:

oil and gas
drink and waste water
power
chemical
food and beverage
pharmaceutical
metals and mining
pulp and paper

Pulse/Analog output - PN 10 bar	Pulse output - PN 16 bar	Pulse/Analog output - PN 16 bar
	MVM-001-PN \| 0,0083 ... 1 l/min	MVM-001-PA \| 0,0083 ... 1 l/min
MVM-002-QA \| 0,1 ... 2 l/min	MVM-002-PN \| 0,05 ... 2 l/min	MVM-002-PA \| 0,05 ... 2 l/min
MVM-005-QA \| 0,25 ... 5 l/min
MVM-020-QA \| 1 ... 20 l/min
	MVM-030-PN \| 0,5 ... 30 l/min	MVM-030-PA \| 0,1 ... 30 l/min
MVM-050-QA \| 2,5 ... 50 l/min
	MVM-060-PN \| 1 ... 60 l/min	MVM-060-PA \| 0,2 ... 60 l/min
MVM-200-QA \| 10 ... 200 l/min
MVM-250-QA \| 12,5 ... 250 l/min	MVM-250-PN \| 5 ... 250 l/min	MVM-250-PA \| 5 ... 250 l/min