What are you looking for?
Bronkhorst
Datasheet F-201CB

EL-FLOW Base F-201CB

標準和基本的氣體質量流量控制器

  • 精確的質量流量測量/控制氣體質量流量控制器，標準的和基本的
  • 成熟的熱旁路傳感器
  • 響應速度快，重複性好
  • 幾乎與壓力和溫度無關
  • 具有成本效益的解決方案
詢價 下載 數據表
EL-FLOW BaseF-201CB

Gas Mass Flow Controllers for OEM Applications

Bronkhorst® EL-FLOW® Base model F-201CB Mass Flow Controllers (MFCs) are standard and straightforard instruments suited for precise measurement and control of flow ranges between 0,16…8 mln/min and 0,4…20 ln/min at operating pressures between vacuum and 10 bar(g). EL-FLOW® Base instruments are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. In addition to the standard analog I/O the MFCs also offer RS232 or Modbus-RTU or -ASCII communication.

EL-FLOW® Base is an economical solution for installation in (OEM) systems e.g. in coating or welding applications.

Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 0,16…8 mln/min
max. 0,4…20 ln/min
(based on N2)
Accuracy (incl. linearity) (based on actual calibration)± 1 % FS
Repeatability< 0,2 % RD
Turndown ratio1:50 (2…100%)
Operating pressure0…10 bar g
Settling time (in control, typical)approx. 1 sec.
Control stability< ± 0,1 % FS (typical for 1 ln/min N2)
Operating temperature0 … 50 °C
Temperature sensitivityzero: < 0,1% FS/°C; span: < 0,1% Rd/°C
Pressure sensitivity< 0,15% Rd/bar at 4...10 bar(g);
< 0,25% Rd/bar at 1...4 bar(g);
< 0,5% Rd/bar at 0...1 bar(g)
Max. Kv-value6,6 x 10-2
Leak integrity, outboardtested < 2 x 10-9 mbar l/s He
Attitude sensitivitymax. error at 90° off horizontal 0,2% FS at 1 bar, typical N2
Warm-up time30 min. for optimum accuracy
2 min for accuracy ± 2% FS
Mechanical parts
Material (wetted parts)stainless steel 316L or comparable
Process connectionscompression type or face seal couplings
Sealsstandard: Viton®; option: Kalrez® (FFKM)
Weight0,5 kg
Ingress protectionIP40
Electrical properties
Power supply+ 15 … 24 Vdc
Max. power consumption
Supply
15 V
24 V		 at voltage I/O
290 mA
200 mA		 at current I/O
320 mA
215 mA
Analog output0...5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communicationRS232 or Modbus-RTU or -ASCII (RS485)
Electrical connection
Power/Analog/RS232/RS4859-pin D-connector (male)
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
EL-FLOW Base Brochure
Manuals
Manual EL-FLOW Base
Quick installation guide
Hook-up diagrams
Analog IO - RS232
Dimensional drawing
Dimensional drawing F-201CB
Solids 3D
F-201CB
Download as PDF
台灣柏朗豪斯特股份有限公司

新竹縣竹北市台元街三十八號四樓之一、二
Rm. 1 & 2, 4F., No.38, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.)
電話 +886 3-5600-518
[email protected]

            Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!