E-8000 Series

電子讀出/控制系統

顯示/操作/配置測量值（直接或％）、設置點、累積流量、流體/標籤編號、控制特性、現場總線設置、警報功能（最小/最大、響應、計數）、流體選擇（最多可存儲8種流體/曲線於質量流量計/質量流量控制器）
明亮、寬角的1.8英寸顯示屏（TFT技術）
單通道和多通道配置
用於與Bronkhorst數字流量和壓力計/控制器、蒸汽傳遞系統和防爆儀器一起使用。

詢價下載 Support

Power Supply / Readout and Control

Bronkhorst offers Power Supply / Readout and Control Modules for use with digital Mass Flow Meters / Controllers, Pressure Meters/ Controllers and other transmitters and transducers with RS-232 communication. The E-8000 Series have one or two colour TFT displays per module for indication of measured/totalised values and a push button menu to easily enable the user to change the setpoint, reset the counter value, select another fluid and many functions more.

Multi Channel Configurations

Based on the modular technique of the E-8000 series, it is easy to assemble multi channel configurations in ½ 19” and 19” housings, either for rack mount or table top. The exact number of channels to be served with one (½ 19”) or two (19”) power supplies, depends on the type of instruments (meters / controllers) to be connected. For most applications one power supply can serve at least four channels.

CEM, Ex-Proof and PID-Controller Configurations

For Controlled Evaporation Mixing (CEM) systems a single channel module for temperature control can be integrated into a 1-channel cassette and ½ 19” or 19” housings. Also for Ex-Proof instruments and configurations with third party sensors or actuators requiring a PID controller, Bronkhorst developed dedicated modules.These module are all available with or without display and with various fieldbus options.

Technical specifications

Mechanical
1- or 2-channel table top housing (1 module)
1- or 2-channel cassette for panel mounting (1 module)
½ 19” table top housing (max. 3 modules)
½ 19” rack housing (max. 3 modules)
19” table top housing (max. 6 modules)
19” rack housing (max. 6 modules)
As an option, ½ 19” and 19” housings can be supply with front handles or carrying handles

Electrical
Mains voltage 100...240 Vac (50...60 Hz)
Output signal/setpoint signal: Digital: FLOW-BUS (RS-485) or RS-232
Option for CEM, Ex-Proof and PID controller modules: PROFIBUS DP, PROFINET, DeviceNet™, Modbus or EtherCAT® interface
Subminiature D-connector socket for RS-232 instrument connection
RJ45-connection for connection with FLOW-BUS communication
Power Supply capacity +24 Vdc, 1.25 A (30 W)

Technical specifications subject to change without notice.

Downloads

Brochures
E-8000 brochure

Manuals
E-8000 manual (9.17.076, 9.19.076)
E-8000 QIG (9.17.077)

Hook-up diagrams
E-8000 CEM analog I-O
E-8000 CEM DeviceNet
E-8000 CEM EtherCAT
E-8000 CEM FLOW-BUS
E-8000 CEM Modbus
E-8000 CEM PROFIBUS
E-8000 CEM RS232
E-8000 CEM W-10xA-202A
E-8000 CEM W-303B 230V
E-8000 FLOW-BUS
E-8000 RS232
E-8000 supply
E-8000 PID analog IO
E-8000 PID DeviceNet
E-8000 PID EtherCAT
E-8000 PID FLOW-BUS
E-8000 PID Modbus
E-8000 PID PROFIBUS
E-8000 PID PROFINET
E-8000 PID RS232
E-8000 PID IO
E-8000 ATEX analog I-O
E-8000 ATEX DeviceNet
E-8000 ATEX EtherCAT
E-8000 ATEX FLOW-BUS
E-8000 ATEX MFM
E-8000 ATEX MFM-XB-Coil
E-8000 ATEX MFM-XC-Coil
E-8000 ATEX Modbus
E-8000 ATEX PROFIBUS
E-8000 ATEX Profinet
E-8000 ATEX RS232

Dimensional drawing
E-8000 dimensions