MAG-VIEW MVM-005-QA

Low-Flow Magnetic Inductive Flow meters for water-like liquids

Compact, weatherproof (IP65) design
No moving parts (no mechanical wear)
Interference free operation
Independence to inlet/outlet pipework
Fast response
Free pipe cross section: low ΔP, insensitive to contamination
Cost-optimized (plastic) model

MASSFLOW-ONLINE product
Get a quote 다운로드 Buy now Datasheet

Electromagnetic flow meters for low flow rates of water and aqueous solutions

MAG-VIEW instruments are electromagnetic inductive flow meters for electrically conductive liquids with a minimum conductivity of 20 μS/cm. The compact, weatherproof (IP65) flow meters do not contain any moving parts, cause virtually no pressure loss and can be mounted in any position, requiring no straight inlet or outlet runs.

MAG-VIEW flow meter model MVM-005-QA is a cost-efficient instrument with a DN8 PVDF measuring tube for flow rates of 0,25…5 l/min, suited for operating pressures up to 10 bar(g). The analog and pulse output signals of the instrument are proportional to the flow.

기술 정보

Measurement / control system

유량	0,25 … 5 l/min (max. flow 6 l/min)











Volume flow accuracy	±0.7 % of reading ±0.3 % of range (incl. factory calibration certificate; test conditions: water 23°C)

Repeatability	1 % FS
Turndown ratio	1:20 (5...100%)






Signal output starting from	~ 0,1 l/min

Media	Water and other conductive liquids (minimum conductivity of 20 μS/cm)






Response time (sensor)	< 100 msec









Operating temperature	Medium -10…60°C, Ambient 5…60°C, not freezing


Mounting	Any position, attitude insensitive















Flow indication	blinking green LED

Mechanical parts







Material (wetted parts)	Electrodes and grounding rings: Stainless Steel 316L Measuring pipe: PVDF Process connections: PVDF

Housing	ABS





Diameter	DN6
Process connections	½" BSP male thread

Seals	EPDM

Ingress protection	IP65


Nominal pressure	max. 10 bar at 20°C, 8 bar at 40°C, 6 bar at 60°C

Electrical properties

Power supply	12 … 24 Vdc ±10 %


Max. power consumption	3,6 W







아날로그 출력	4 … 20 mA





Frequency output	Pulse rate / K-factor : 4000 pulses/l Resolution : 0,25 ml/pulse Signal shape : Push-Pull Signal current : max. 25 mA



Electrical protection measures	Short-circuit proof, protected against polarity reversal








Electrical connection	4-pin-plug M12x1

Electrical connection

Control valve options

External actuator options to be connected to the controller

Certification for hazardous areas

Approvals / certificates

Downloads

Brochures
MAG-VIEW Brochure

MAG-VIEW MVM-005-QA

Electromagnetic flow meters for low flow rates of water and aqueous solutions

기술 정보

Downloads

Related products