MAG-VIEW MVM-002-PA

Low-Flow Magnetic Inductive Flow meters for water-like liquids

Compact, weatherproof (IP65) design
No moving parts (no mechanical wear)
Interference free operation
Independence to inlet/outlet pipework
Fast response
Free pipe cross section: low ΔP, insensitive to contamination
Analog output (4...20 mA)

MASSFLOW-ONLINE product
お見積り依頼 Downloads Buy now Datasheet

Electromagnetic flow meters for low flow rates of water and aqueous solutions

MAG-VIEW instruments are electromagnetic inductive flow meters for electrically conductive liquids with a minimum conductivity of 50 μS/cm. The compact, weatherproof (IP65) flow meters do not contain any moving parts, cause virtually no pressure loss and can be mounted in any position, requiring no straight inlet or outlet runs.

MAG-VIEW flow meter model MVM-002-PA has a nominal diameter of DN2 for flow rates of 0,05...2 l/min, suited for operating pressures up to 16 bar(g). The instrument allows frequency and analog output (4...20 mA) proportional to the flow.

Technical specifications

Measurement / control system

流量レンジ	0,05 … 2 l/min











Volume flow accuracy	±1% RD at 0...50% of measuring range ±2% RD at 50...100% of measuring range (incl. factory calibration certificate; test conditions: water 23°C)


Turndown ratio	1:40




Reproducibility	1 % FS

Signal output starting from	~ 0,05 l/min

Media	Water and other conductive liquids (minimum conductivity of 50 μS/cm)






Response time (sensor)	< 500 msec











Medium temperature	-20 … 90 °C
Mounting	Any position, attitude insensitive















Flow indication	green LED, flow proportional flashing

Mechanical parts







Material (wetted parts)	Electrodes: Stainless Steel 1.4571 Process connections: Stainless Steel 1.4571 Measuring pipe: PEEK-GF30 Gasket: EPDM

Housing	Aluminium pressure diecasted





Diameter	DN2
Process connections	1/4" BSP male thread



Ingress protection	IP65


Nominal pressure	PN16

Electrical properties

Power supply	24 Vdc ±10 %


Max. power consumption	≤ 150 mA







Analog output	4…20 mA, max. load 250 Ω to GND





Frequency output	Pulse rate / K-factor : 10000 pulses/l Resolution : 0,1 ml/pulse Signal shape : Square wave signal - duty cycle 50:50 Push-Pull - NPN open collector [o.c.] - PNP o.c. Signal current : max. 100 mA, current limited



Electrical protection measures	Short-circuit proof, protected against polarity reversal








Electrical connection	5-pin-plug M12x1

Electrical connection

Control valve options

External actuator options to be connected to the controller

Certification for hazardous areas

Approvals / certificates

Downloads

Brochures
MAG-VIEW Brochure

MAG-VIEW MVM-002-PA

Electromagnetic flow meters for low flow rates of water and aqueous solutions

Technical specifications

Downloads

Related products