Bronkhorst

Series W-001, W-002, W-003

Mixing valves

  • Injecting liquid into carrier gas flow
  • Pressure up to 100 bar
  • Kv-max: 6.6 x 10-2
お見積り依頼 Downloads
Series W-001, W-002, W-003

Mixing valves for evaporation purposes

Bronkhorst® mixing valves are usually supplied as an integral part of a Control Evaporator Mixer (CEM). They may also be supplied separately as a replacement part or for a particular set-up that does not require a heating chamber for complete evaporation of the liquid which is injected the carrier gas flow.
Mixing valve models W-001/W-002/W-003 have a pressure capability of 100 bar (1500 psi) and a purge connection for easy elimination of air or gas. They are directly operated by a magnetic coil with IP65 (weatherproof) housing and are closed when de-energized (Normally Closed).


Technical specifications

Measurement / control system
流量レンジGas: max. 100 ln/min
Liquid: max. 1000 g/h
Operating temperature-10...+70°C
Max. Kv-value6,6 x 10-2
Leak integrity, outboardtested < 2 x 10-9 mbar l/s He
Mechanical parts
Material (wetted parts) stainless steel 316L/320;
other on request
Pressure rating (PN)100 bar a
Process connectionsInlet gas: compression type or face seal (VCR/VCO) couplings
Inlet liquid: compression type or face seal (VCR/VCO) couplings
Outlet mix: metal sealed connection for heat exchanger (standard)
or compression type / face seal coupling (optional)
Purge connection1/8” UN or face seal
SealsKalrez® (FFKM)
Protection classIP65
PlungerKalrez® (FFKM)
Electrical properties
Supply voltage15 Vdc or 24 Vdc
Valve control signal0... 185 mA
Coil resistance62 Ohm
De-energized positionNormally closed
Electrical connectionDIN 43650 connection
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Dimensional drawings
Dimensional Drawing W-001 / W-002
Dimensional Drawing W-003


ブロンコスト・ジャパン株式会社
〒135-0016
東京都江東区東陽5-27-5

Tel.  03-3645-1371

sales◎bronkhorst.jp   ◎を@に置き換えて下さい

     
Copyright © 2024 Bronkhorst. All rights reserved.     サイトマップ     免責事項     プライバシーポリシー