What are you looking for?
Bronkhorst
Datasheet FF-C1x

FLEXI-FLOW Compact FF-C1x

Built-to-Order Mass Flow and Pressure Controller

  • Swift and stable control
  • On-board gas conversion model
  • 22 unique gases embedded
  • Multi-parameter output: mass flow, temperature and pressure
  • USB-C and Bluetooth communication
  • Namur NE107 status indication
Get a quote Downloads Datasheet
FLEXI-FLOW CompactFF-C1x

Mass Flow / Pressure Controllers for Low Gas Flows

FLEXI-FLOW Compact models FF-C10 and FF-C11 Built-to-Order (BtO) Mass Flow / Pressure Controllers are suited for accurate measurement and control of flow ranges between 0…500 mln/min and 0…20 ln/min at operating pressures between 0,8 and 17 bar(a). The instrument combines a swift and stable thermal mass flow sensor based on capillary MEMS technology with a precise and proven by-pass construction. Due to the unique, internationally patented TCS Technology (Through Chip Sensor), accurate mass flow measurement, virtual independent of variations in temperature and line pressure is established. In combination with integrated temperature and up- and downstream pressure sensors, the embedded database for 22 gases allows accurate, on-board conversion. The multi-parameter instruments provide the user with useful process information. 

FLEXI-FLOW Compact Built-to-Order models feature a Mass Flow / Pressure Controllers a turndown to 1:1000; free selection of ranges between 0,5 and 20 ln/min (FS, based on N2). They are currently available in 2 variants:

  • Type FF-C10: flow + temperature
  • Type FF-C11: flow + temperature + up- and downstream pressure
BtO models may also be used to configure multi-channel versions up to 8 channels.

Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 0…500 mln/min
max. 0…20 ln/min
(based on N2)
Pressure rangesFF-C10: not available / FF-C11: 0...17 bar(a)
Accuracy (incl. linearity) (based on actual calibration)Up to ±0,5% Rd plus ±0,1% FS (N2/Air/O2);
for other gases add conversion uncertainty; see multi gas table;
RepeatabilityFlow sensor: < ±0,2% Rd;
Pressure sensors: < ±0,2% FS
Turndown ratioup to 1:1000
Max. operating pressure16 bar(g)
Multi Gas/Multi Rangeembedded gas data for 22 unique gases plus any mixture of these gases
Settling time (in control, typical)< 150 ms
Long term stability< 0,5% FS over period of 3 years; then < 0,2% FS per year
Control stability< ± 0,1% FS (typical for 1 ln/min N2)
Operating temperature0 … 50 °C
Storage / Transport conditions-20 … +50 °C, max. 95% RH (non-condensing)
Mountingany position, attitude sensitivity negligible
Temperature sensitivityFlow sensor: zero 0,015% FS/ºC; span 0,05% Rd/ºC;
Pressure sensors: zero 0,16 mbar/ºC; span 0,05% Rd/ºC
Temperature accuracy± 0,2 ºC (instrument body temperature)
Accuracy pressure sensors±0,5% FS
Pressure sensitivitystandard: < 0,15% Rd/bar typical N2;
with pressure correction: typical factor 5 improved
Leak integrity, outboardtested < 2 x 10-9 mbar l/s He
Leak-by through closed valvetypical < 1 x 10-4 mbar·l/s He
Mechanical parts
Instrument bodyAluminium or Stainless steel (selectable);
Material (wetted parts)aluminium, stainless steel, silicon nitride, epoxy, aluminium oxide, glass
Surface quality< 1,6 mu Ra (<0,8 mu Ra for stainless steel body)
Pressure rating (PN)16 bar(g) / 250 psig
Max. ΔP16 bar(d);
20 ln/min models: 5 bar (d)
Process connectionsdefault: BSPP female thread (ISO1179-1)
optional: compression type, push-in or face seal fittings
SealsFKM 51415; valve seat: FFKM with PI film;
for other materials contact factory
Weight200 g with Aluminium body, 300 g with SS 316 body;
add 50 g for Ethernet interface
Ingress protectionIP40
Electrical properties
Power supply24 Vdc ± 10%
Max. power consumption2,5 Watt (typical, in control);
add 0,9 Watt for EtherNet communication
Digital communicationModbus RTU or FLOW-BUS (selectable)
Optional: PROFINET, EtherCAT, Modbus-TCP, Ethernet/IP or POWERLINK
Support interfaceUSB-C port for easy setup;
Optional Bluetooth connection for monitoring
Electrical connection9-pin D-sub (male)
CertificationCE / UKCA / KC
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
FLEXI-FLOW Compact brochure
FLEXI-FLOW Compact datasheet Advanced Functionalities
Manuals
Manual FLEXI-FLOW Compact
Quick Start Guide FLEXI-FLOW Compact
Mounting Instruction Compression Fittings RS
Mounting Instruction Compression Fittings ISO
Mounting Instruction Push-in Fittings
Hook-up diagrams
FLEXI-FLOW Compact Modbus-RTU / FLOW-BUS
FLEXI-FLOW Compact Ethernet
Dimensional drawings
Dimensional drawing FF-C1x
Solids 3D
FLEXI-FLOW Compact FF-C1x - Modbus-RTU / FLOW-BUS
FLEXI-FLOW Compact FF-C1x - Ethernet
Download as PDF

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!