Bronkhorst

Series C2I, C5I

Liquid Flow Valves

  • Direct acting valve
  • Pressure rating 64/100 bar
  • Kv-max: 6.6 x 10-2
Get a quote Downloads Datasheet
Series C2I, C5I
Series C2I, C5I

Liquid Flow Control Valves

Bronkhorst® mass flow meters for liquids can be connected to a control valve to form a closed control loop. The standard direct acting valve, model C2I, is normally closed, has a pressure capability of 100 bar (1500 psi) and a purge connection for easy elimination of air or gas.
For liquid flow applications with higher flow rates and pressure rating up to 100 bar, Bronkhorst designed the control valve model C5I, however this control valve may also be used for gas flow applications.
C2I and C5I control valves are directly operated by a magnetic coil with IP65 (weatherproof) housing and are closed when de-energized (Normally Closed). Depending on flow rate and fluid the liquid flow control valves allows a pressure drop of max. 5 to 40 bar (d).


Technical specifications

Measurement / control system
Operating temperature-10... 70 °C
Max. Kv-valueC2I: 2,37 x 10-3;
C5I: 6,6 x 10-2
Mechanical parts
Outer sealsmetal sealed
Material (wetted parts)stainless steel 316L or comparable
Pressure rating (PN)100 bar a
Max. ΔP5...40 bar
(depends on Kv-value; contact your distributor for details)
Process connectionscompression type or face seal (VCR/VCO) couplings
Protection classIP65
PlungerFFKM/Kalrez®; other on request
Electrical properties
Power supply+15...24 Vdc +/-10%
Max. power consumption4 W
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Dimensional drawings
Dimensional Drawing C5I
Dimensional Drawing M12-M13-M14 with C5I
Dimensional Drawing M15 with C5I
Dimensional Drawing C2I
Dimensional Drawing M12-M13-M14 with C2I
Dimensional Drawing M15 with C2I

Related products