We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
A manufacturer of microfluidic systems was looking for a flow solution to measure micro fluids more efficiently. At the start of their search, thermal mass flow meters were used. However, they observed that the thermal mass flow measurements in their application were too unstable and could not be reproduced. Bronkhorst suggested an alternative solution, using Coriolis technology for the microfluidic flow meter.
In microfluidic systems, liquids behave in a different way compared to flow in ‘normal’ channels. Due to the small size of the channels, the ‘fluid-wall’ phenomena play a dominating role. Microfluidic devices find their application in fields such as pharmaceutics and biotechnology, reducing the number of chemicals and experimental time.
For this application, the microfluidic systembuilder desired to limit the number of flow instruments by simplifying the solution. In the consisting setup, five mass flow meters were used to cover a specific flow range. A second wish was to improve the accuracy and repeatability of the measurement itself.
Looking at the user’s needs, Bronkhorst concluded that the ML120 mini CORI-FLOW flow meter series would be able to cover the entire microfluidics range needed. The idea was to test this Coriolis flow meter and to compare the results with the ones from the thermal flow meter. During two months the ML120 device was tested thoroughly.
The test results stated that using the Coriolis-based flow meter the accuracy, stability and repeatability where better than the original setup with thermal flow meters. Moreover, the results showed that it was possible to replace five thermal mass flow meters by one Coriolis-based flow meter (ML120 mini CORI-FLOW series) with a large dynamic range to cover the same range. Not even was the test succeful, but the customer integrated the ML120 device in their product range as well.
As part of further cooperation with Bronkhorst, the microfluidic system builder developed a user guide for (future) users and a selling guide for the sales engineers. Moreover, some programming work in LabVIEW is performed to communicate with Bronkhorst devices.