Bronkhorst

VDM Evaporator SW-100

Vapour Delivery Module

  • Accurately controlled gas/liquid mixture
  • Pre-tested, safe and ready to use
  • High reproducibility
  • Very stable vapor flow
Get a quote Downloads Datasheet
VDM EvaporatorSW-100

All-In-One Vapor Delivery Module

Bronkhorst® model SW-100 VDM All-In-One Vapor Delivery Modules are suited for precise vapor flow delivery, composed by mixing up to 30 g/h H2O (32 g/h IPA) with max. 4 ln/min of carrier gas at operating pressures between vacuum and 10 bar. The VDM incorporates the components of a Bronkhorst® CEM-System and more! Besides gas and liquid flow controllers and the temperature controlled evaporator, the module features integrated power supply with display (1,8"TFT) and control functions. As an option, the unit offers local or remote trace heating temperature control.


Technical specifications

Measurement / control system
Ambient temperature5 … 40 °C
Max. heating temperature200 °C
Heater capacity10 W
Mechanical parts
Material (wetted parts)stainless steel 316L or comparable
Pressure rating (PN)10 bar g
Process connectionsGas and liquid inlet: compression type or face seal couplings;
Vapour outlet: 1/4" tube (other options on request)
SealsViton®/Kalrez®; other on request
Purge outlet1/8" OD compression type or 1/8" face seal male
PlungerKalrez®; other on request
Display1,8" (TFT technology)
Mains supply inletIEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz
Electrical properties
Max. power consumptionmax. 250 VA;
add 300 VA for optional tracing control
Electrical connectionFLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector);
Optional: Pt100-connection (1 x 4-pin M12 male, a-coded);
Optional: IEC 60320-2-2/C13 female tracing outlet
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

Note: For gas an liquid flow control, the VDM module is equipped with Bronkhorst Thermal or Coriolis Mass Flow Meters/Controllers.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
VDM brochure
Manuals
Manual Vapor Delivery Module
Dimensional drawing
Dimensional Drawing SW100-SW200


BRONKHORST (UK) Ltd

1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

         Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note