Bronkhorst

MASS-STREAM MS-109

Mass Flow Meter for 1000 ln/min - Mass Flow ONLINE

  • Shipped within 2 days
  • Proven direct inline CTA sensor (no bypass)
  • Excellent repeatability
  • Compact, rugged design (IP65, dust and waterproof)
  • Very low pressure drop
  • Less sensitivity to humidity or dirt
  • 6 pre-installed gases: Air, N2, O2, Ar, CH4, CO2
  • With integrated multi-functional TFT display

Mass Flow ONLINE product

Get a quote Downloads Buy now Datasheet
MASS-STREAMMS-109

MASS-STREAM THERMAL MASS FLOW METER FOR GASES

MASS-STREAM mass flow meters for gases are based on the thermal through-flow measurement principle. 

Covering a wide measurement range, from 0.5...50 ln/min up to 10...1000 ln/min Air equivalent. Each Mass Flow Meter is equipped with exciting features, like our multi-functional on-board display for indicating actual flow, totalized flow, and alarms.

All 4 models, have 6 pre-installed gases: Air, N2, O2, Ar, CH4, CO2; analog 4-20mA output signals and Digital RS-232 communication. With Bronkhorst's FLUIDAT Onboard it is possible to select other gases or mixtures via our free software Bronkhorst FlowSuite.


Technical specifications

Measurement / control system
Flow range (intermediate ranges available)up to 1000 ln/min Air
Accuracy (incl. linearity) (based on actual calibration)± 1,0 % RD plus ± 0.5% FS (at calibration conditions)
(incl. factory calibration certificate on Air)
Repeatability< 0,2 % FS
Turndown ratio1:50
Operating pressureup to 10 bar (g)
Pre-installed gasesAir, N2, O2, Ar, CH4, CO2 + FLUIDAT Onboard
Standard calibration gasAir, other gases are converted using our FLUIDAT Onboard model which will introduce small inaccuracy
Response time (sensor)approx 0,9 sec.
Operating temperature0 … 50 °C
Storage / Transport conditions0 … 50 °C, max. 95% RH (non condensant)
Temperature sensitivity±0,1% Rd/°C (Air)
Pressure sensitivity±0,3% Rd/bar typical (Air)
Leak integrity, outboardtested < 2 x 10-8 mbar l/s He
Attitude sensitivityat 90° deviation from horizontal max. error 0,2 % at 1 bar typical N2
Mechanical parts
Material (wetted parts)Instrument body: Aluminium EN AW-6082-T6
Sieves, rings and sensor: Stainless steel SS 316
Process connectionsBSPP female thread G1/4" (ISO1179-1)
SealsFKM
Ingress protectionIP65
Electrical properties
Power supply+15 … 24 Vdc ±10%
Analog output4…20 mA (sourcing output)
Digital communicationRS232
Electrical connection8 DIN (male)
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates
Environmental / EMCCE / RoHS

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
MASS-STREAM Datasheet Online Models
Manuals
Manual MASS-STREAM D-6400 instruments
Manual MASS-STREAM D-6400 display
Quick installation guide D-6400 series


BRONKHORST (UK) Ltd

1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

         Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note