Bronkhorst
Application note A084-GP99

Improved release agent spraying in industrial boot manufacturing

The Dutch office of a worldwide operating industrial boot manufacturer has multiple production lines to manufacture several types of high-performance industrial boots for applications in slaughterhouses, horse ride and many more. 

In the manufacturing process, rubber compositions  are used for bootleg and sole and these are injected into a mould. For this part of the production process, a thin layer of release agent is used in the mould. To dose a specific amount of release agent, the boot manufacturer requested the help of Bronkhorst using a Coriolis mass flow meter solution.   
 

afbeelding

Application requirements

The critical step in the injection moulding process is the spot where the rubber compositions for bootleg and sole contact each other. It is important that the product, when it’s ready, can be easily removed from the mould in perfect condition to keep the amount of rejected boots as low as possible. For that purpose, it is important to use a release agent and that it is applied in a constant flow. 

Important topics

  • Process analysis
  • Better grip on injection moulding process
  • More efficient boot production


Process solution

Prior to the implementation of the solution, the spraying process was analysed by a Bronkhorst Coriolis mass flow meter (series mini CORI-FLOW M14) in combination with the Bronkhorst FlowPlot software, to get a good understanding of the way the moulds have been sprayed. The choice for this device has been made based on the short spraying time of the release agent in the process, in accordance with the flow capacity of the M14 mass flow meter.

By adding a Coriolis flow meter in combination with a valve (acting as a flow controller) to the process, Bronkhorst was able to improve the spraying process. This combination enabled to spray a constant flow of the watery release agent. 
By applying this Bronkhorst solution, the amount of release agent used in the process was controlled in a better way, resulting in the use of less of this agent and, hence, eliminating waste of release agent.

Furthermore, the number of rejected boots decreased as a result of this solution, improving the productivity of the entire boot manufacturing process. The payback time of this Bronkhorst solution is in the order of a few months.

As a sign of success of the current Bronkhorst solution, the boot manufacturer ordered a second set of devices for their production lines. Moreover, Bronkhorst was also requested to assist in analysing the boot manufacturing steps where the rubber compositions are being synthesised. 

Process scheme
Process scheme

Would you like to know more?

Stay up to date with the latest developments in high tech with our newsletter.

Contact us for advice Subscribe to our Newsletter

BRONKHORST (UK) Ltd

1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

         Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note